PVA

Panavise Adaptor for Professional Binding Machine Carrier (BM2C)

$20.57

The Panavise Adaptor can be attached to the back of the BM2C carrier which turns the carrier into a work holder when used in conjunction with the Panavise Assembly, PVISE. You need this adaptor to attach to the back of the carrier, which then can mount into the Panavise assembly. This simply screws to the back of your carrier with two machine screws. 

Quantity


In Stock

Product Description

INSTALLATION: To use the BM2MK mounting kit for the LMI BM2 Professional Binding Jig, install the two 1/4"-20" threaded inserts 4 1/2” apart flush with the bench top. You can use the nut on the bolt to drive the insert if desired. Insert the bolts, locate the base over the bolts, drop down to engage and slide back to the slot stops. Tighten the bolts (3/8" hex head) with a socket wrench or nut driver. To remove, loosen the bolts 1/2 turn, slide base fully forward and remove.

See our video for a further explanation of this adaptor (at the 8:11 mark on the video).

Details

Shipping Restrictions - Location
No Restrictions
Tool Type or Function
Binding Installation

Recommended Products

Reviews

No customer reviews for the moment.

Write your review

Panavise Adaptor for Professional Binding Machine Carrier (BM2C)

The Panavise Adaptor can be attached to the back of the BM2C carrier which turns the carrier into a work holder when used in conjunction with the Panavise Assembly, PVISE. You need this adaptor to attach to the back of the carrier, which then can mount into the Panavise assembly. This simply screws to the back of your carrier with two machine screws. 

Write your review